Top

Pouches for 12 gauge

Holders for 12 gauge with belt
Pouches for 12 gauge - Holders for 12 gauge with belt  1
Pouches for 12 gauge - Holders for 12 gauge with belt  1
Pouches for 12 gauge - Holders for 12 gauge with belt  2
Pouches for 12 gauge - Holders for 12 gauge with belt  3

Holders for 12 gauge with belt

270

Holders are designed for high-speed loading of 2 or 4 cartridges 12 gauge, and produced, considering the experience and recommendations of the leading shooters-athletes of Ukraine, for sports purposes.
Due to its design, the product has the ability to work with cartridges of any length without the need for additionally adjustment of the distance between the upper and lower plates, which makes it possible due to availability of springs in the design of holders. Movable parts of holders are made of metal, static parts are made of molded plastic, which provides a long term operation of the product at high force.
The lower cups for cartridge holding are designed so that removal of cartridges can be carry out both from the upper mounts and from the lower ones.
Holders exist in versions for both left or right control arms. Holder configuration provides that the cartridges are placed in a row at an angle, so that when they are gripped, they are found in the hand at different heights relative to each other. That is, when gribbing four cartridges, the thumb is placed on cartridge below. This arrangement helps to prevent wringing of cartridges during gun loading.
1 section of holders is intended for 4 cartridges. Holders consist of blocks in which can be 7 sections (contains 28 cartridges), 4 sections (16 cartridges) and 2 sections (8 cartridges). The holder block is attached to the belt with screws. Sections in blocks are attached to each other with a help of a kydex plate. Structurally, the plate connects sections with one another in such way that the cartridges relative to each other are located at a minimum distance, which allows to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate which help to adjust the angle of bending of holder block to the parameters of the shooter’s waist.
The top row of holes corresponds to the smallest waist «S» - up to 80 cm.
The bottom row of holes corresponds to «L» - 80 cm or more.

Holders are designed for high-speed loading of 2 or 4 cartridges 12 gauge, and produced, considering the experience and recommendations of the leading shooters-athletes of Ukraine, for sports purposes.
Due to its design, the product has the ability to work with cartridges of any length without the need for additionally adjustment of the distance between the upper and lower plates, which makes it possible due to availability of springs in the design of holders. Movable parts of holders are made of metal, static parts are made of molded plastic, which provides a long term operation of the product at high force.
The lower cups for cartridge holding are designed so that removal of cartridges can be carry out both from the upper mounts and from the lower ones.
Holders exist in versions for both left or right control arms. Holder configuration provides that the cartridges are placed in a row at an angle, so that when they are gripped, they are found in the hand at different heights relative to each other. That is, when gribbing four cartridges, the thumb is placed on cartridge below. This arrangement helps to prevent wringing of cartridges during gun loading.
1 section of holders is intended for 4 cartridges. Holders consist of blocks in which can be 7 sections (contains 28 cartridges), 4 sections (16 cartridges) and 2 sections (8 cartridges). The holder block is attached to the belt with screws. Sections in blocks are attached to each other with a help of a kydex plate. Structurally, the plate connects sections with one another in such way that the cartridges relative to each other are located at a minimum distance, which allows to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate which help to adjust the angle of bending of holder block to the parameters of the shooter’s waist.
The top row of holes corresponds to the smallest waist «S» - up to 80 cm.
The bottom row of holes corresponds to «L» - 80 cm or more.

Holders for 12 gauge (without belt)
Pouches for 12 gauge - Holders for 12 gauge (without belt) 1
Pouches for 12 gauge - Holders for 12 gauge (without belt) 1
Pouches for 12 gauge - Holders for 12 gauge (without belt) 2
Pouches for 12 gauge - Holders for 12 gauge (without belt) 3

Holders for 12 gauge (without belt)

33 - 239

The holders are designed for high-speed loading of 2 or 4 rounds of 12 gauge ammunition, based on the experience and recommendations of leading Ukrainian shooters for use in sports.

The design features of the product allow you to work with cartridges of any length without the need to additionally adjust the distance between the upper and lower plates, which is made possible by the presence of springs in the holder design. Moving parts of the holders are made of metal, static parts are made of molded plastic, which ensures a long service life of the product under high loads.

The lower ammunition holder cups are designed in such a way that ammunition can be removed from both the upper and lower holders. The holders are available in versions for both left and right handed operators. The configuration of the holders implies that the cartridges in a row are placed at an angle so that when gripped, they are at different heights relative to each other. That is, when gripping four cartridges, the thumb is placed on the cartridge below it. This arrangement helps prevent cartridges from jamming when the gun is loaded.

1 section of holders is designed for 4 cartridges. The holders consist of blocks that can have 7 sections (holds 28 rounds), 4 sections (16 rounds) and 2 sections (8 rounds). The holder block is attached to the belt with screws. The sections in the holder blocks are attached to each other by means of a kydex plate. Structurally, the plate connects the sections together in such a way that the cartridges are located at a minimum distance from each other, which allows you to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate, which allow adjusting the bending angle of the holder block to the shooter's waist.

The holders are designed for high-speed loading of 2 or 4 rounds of 12 gauge ammunition, based on the experience and recommendations of leading Ukrainian shooters for use in sports.

The design features of the product allow you to work with cartridges of any length without the need to additionally adjust the distance between the upper and lower plates, which is made possible by the presence of springs in the holder design. Moving parts of the holders are made of metal, static parts are made of molded plastic, which ensures a long service life of the product under high loads.

The lower ammunition holder cups are designed in such a way that ammunition can be removed from both the upper and lower holders. The holders are available in versions for both left and right handed operators. The configuration of the holders implies that the cartridges in a row are placed at an angle so that when gripped, they are at different heights relative to each other. That is, when gripping four cartridges, the thumb is placed on the cartridge below it. This arrangement helps prevent cartridges from jamming when the gun is loaded.

1 section of holders is designed for 4 cartridges. The holders consist of blocks that can have 7 sections (holds 28 rounds), 4 sections (16 rounds) and 2 sections (8 rounds). The holder block is attached to the belt with screws. The sections in the holder blocks are attached to each other by means of a kydex plate. Structurally, the plate connects the sections together in such a way that the cartridges are located at a minimum distance from each other, which allows you to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate, which allow adjusting the bending angle of the holder block to the shooter's waist.

Pouch ver.7 (with TEK-LOK)

Pouch ver.7 (with TEK-LOK)

52 - 58

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers using the Tek-Lok system. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers using the Tek-Lok system. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

Pouch ver.9 (on lowering platform)

Pouch ver.9 (on lowering platform)

56 - 62

The POUCH ver. 9” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers with a lowering platform. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 9” pouches can be comfortably worn on the waistband of trousers due to their convex shape and lowered position relative to the waistband. The “POUCH ver. 9” is ideal for competitions and other sporting events.

The POUCH ver. 9” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers with a lowering platform. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 9” pouches can be comfortably worn on the waistband of trousers due to their convex shape and lowered position relative to the waistband. The “POUCH ver. 9” is ideal for competitions and other sporting events.

Pouches for 12 gauge

Holders for 12 gauge with belt
Pouches for 12 gauge - Holders for 12 gauge with belt  1
Pouches for 12 gauge - Holders for 12 gauge with belt  1
Pouches for 12 gauge - Holders for 12 gauge with belt  2
Pouches for 12 gauge - Holders for 12 gauge with belt  3

Holders for 12 gauge with belt

270

Holders are designed for high-speed loading of 2 or 4 cartridges 12 gauge, and produced, considering the experience and recommendations of the leading shooters-athletes of Ukraine, for sports purposes.
Due to its design, the product has the ability to work with cartridges of any length without the need for additionally adjustment of the distance between the upper and lower plates, which makes it possible due to availability of springs in the design of holders. Movable parts of holders are made of metal, static parts are made of molded plastic, which provides a long term operation of the product at high force.
The lower cups for cartridge holding are designed so that removal of cartridges can be carry out both from the upper mounts and from the lower ones.
Holders exist in versions for both left or right control arms. Holder configuration provides that the cartridges are placed in a row at an angle, so that when they are gripped, they are found in the hand at different heights relative to each other. That is, when gribbing four cartridges, the thumb is placed on cartridge below. This arrangement helps to prevent wringing of cartridges during gun loading.
1 section of holders is intended for 4 cartridges. Holders consist of blocks in which can be 7 sections (contains 28 cartridges), 4 sections (16 cartridges) and 2 sections (8 cartridges). The holder block is attached to the belt with screws. Sections in blocks are attached to each other with a help of a kydex plate. Structurally, the plate connects sections with one another in such way that the cartridges relative to each other are located at a minimum distance, which allows to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate which help to adjust the angle of bending of holder block to the parameters of the shooter’s waist.
The top row of holes corresponds to the smallest waist «S» - up to 80 cm.
The bottom row of holes corresponds to «L» - 80 cm or more.

Holders are designed for high-speed loading of 2 or 4 cartridges 12 gauge, and produced, considering the experience and recommendations of the leading shooters-athletes of Ukraine, for sports purposes.
Due to its design, the product has the ability to work with cartridges of any length without the need for additionally adjustment of the distance between the upper and lower plates, which makes it possible due to availability of springs in the design of holders. Movable parts of holders are made of metal, static parts are made of molded plastic, which provides a long term operation of the product at high force.
The lower cups for cartridge holding are designed so that removal of cartridges can be carry out both from the upper mounts and from the lower ones.
Holders exist in versions for both left or right control arms. Holder configuration provides that the cartridges are placed in a row at an angle, so that when they are gripped, they are found in the hand at different heights relative to each other. That is, when gribbing four cartridges, the thumb is placed on cartridge below. This arrangement helps to prevent wringing of cartridges during gun loading.
1 section of holders is intended for 4 cartridges. Holders consist of blocks in which can be 7 sections (contains 28 cartridges), 4 sections (16 cartridges) and 2 sections (8 cartridges). The holder block is attached to the belt with screws. Sections in blocks are attached to each other with a help of a kydex plate. Structurally, the plate connects sections with one another in such way that the cartridges relative to each other are located at a minimum distance, which allows to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate which help to adjust the angle of bending of holder block to the parameters of the shooter’s waist.
The top row of holes corresponds to the smallest waist «S» - up to 80 cm.
The bottom row of holes corresponds to «L» - 80 cm or more.

Holders for 12 gauge (without belt)
Pouches for 12 gauge - Holders for 12 gauge (without belt) 1
Pouches for 12 gauge - Holders for 12 gauge (without belt) 1
Pouches for 12 gauge - Holders for 12 gauge (without belt) 2
Pouches for 12 gauge - Holders for 12 gauge (without belt) 3

Holders for 12 gauge (without belt)

33 - 239

The holders are designed for high-speed loading of 2 or 4 rounds of 12 gauge ammunition, based on the experience and recommendations of leading Ukrainian shooters for use in sports.

The design features of the product allow you to work with cartridges of any length without the need to additionally adjust the distance between the upper and lower plates, which is made possible by the presence of springs in the holder design. Moving parts of the holders are made of metal, static parts are made of molded plastic, which ensures a long service life of the product under high loads.

The lower ammunition holder cups are designed in such a way that ammunition can be removed from both the upper and lower holders. The holders are available in versions for both left and right handed operators. The configuration of the holders implies that the cartridges in a row are placed at an angle so that when gripped, they are at different heights relative to each other. That is, when gripping four cartridges, the thumb is placed on the cartridge below it. This arrangement helps prevent cartridges from jamming when the gun is loaded.

1 section of holders is designed for 4 cartridges. The holders consist of blocks that can have 7 sections (holds 28 rounds), 4 sections (16 rounds) and 2 sections (8 rounds). The holder block is attached to the belt with screws. The sections in the holder blocks are attached to each other by means of a kydex plate. Structurally, the plate connects the sections together in such a way that the cartridges are located at a minimum distance from each other, which allows you to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate, which allow adjusting the bending angle of the holder block to the shooter's waist.

The holders are designed for high-speed loading of 2 or 4 rounds of 12 gauge ammunition, based on the experience and recommendations of leading Ukrainian shooters for use in sports.

The design features of the product allow you to work with cartridges of any length without the need to additionally adjust the distance between the upper and lower plates, which is made possible by the presence of springs in the holder design. Moving parts of the holders are made of metal, static parts are made of molded plastic, which ensures a long service life of the product under high loads.

The lower ammunition holder cups are designed in such a way that ammunition can be removed from both the upper and lower holders. The holders are available in versions for both left and right handed operators. The configuration of the holders implies that the cartridges in a row are placed at an angle so that when gripped, they are at different heights relative to each other. That is, when gripping four cartridges, the thumb is placed on the cartridge below it. This arrangement helps prevent cartridges from jamming when the gun is loaded.

1 section of holders is designed for 4 cartridges. The holders consist of blocks that can have 7 sections (holds 28 rounds), 4 sections (16 rounds) and 2 sections (8 rounds). The holder block is attached to the belt with screws. The sections in the holder blocks are attached to each other by means of a kydex plate. Structurally, the plate connects the sections together in such a way that the cartridges are located at a minimum distance from each other, which allows you to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate, which allow adjusting the bending angle of the holder block to the shooter's waist.

Pouch ver.7 (with TEK-LOK)

Pouch ver.7 (with TEK-LOK)

52 - 58

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers using the Tek-Lok system. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers using the Tek-Lok system. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

Pouch ver.9 (on lowering platform)

Pouch ver.9 (on lowering platform)

56 - 62

The POUCH ver. 9” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers with a lowering platform. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 9” pouches can be comfortably worn on the waistband of trousers due to their convex shape and lowered position relative to the waistband. The “POUCH ver. 9” is ideal for competitions and other sporting events.

The POUCH ver. 9” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the ability to quickly remove and replace them. The pouch is attached to the waistband of the trousers with a lowering platform. The holding pressure of the magazines in the pouch is individually adjustable. The “POUCH ver. 9” pouches can be comfortably worn on the waistband of trousers due to their convex shape and lowered position relative to the waistband. The “POUCH ver. 9” is ideal for competitions and other sporting events.