Holders are designed for high-speed loading of 2 or 4 cartridges 12 gauge, and produced, considering the experience and recommendations of the leading shooters-athletes of Ukraine, for sports purposes.
Due to its design, the product has the ability to work with cartridges of any length without the need for additionally adjustment of the distance between the upper and lower plates, which makes it possible due to availability of springs in the design of holders. Movable parts of holders are made of metal, static parts are made of molded plastic, which provides a long term operation of the product at high force.
The lower cups for cartridge holding are designed so that removal of cartridges can be carry out both from the upper mounts and from the lower ones.
Holders exist in versions for both left or right control arms. Holder configuration provides that the cartridges are placed in a row at an angle, so that when they are gripped, they are found in the hand at different heights relative to each other. That is, when gribbing four cartridges, the thumb is placed on cartridge below. This arrangement helps to prevent wringing of cartridges during gun loading.
1 section of holders is intended for 4 cartridges. Holders consist of blocks in which can be 7 sections (contains 28 cartridges), 4 sections (16 cartridges) and 2 sections (8 cartridges). The holder block is attached to the belt with screws. Sections in blocks are attached to each other with a help of a kydex plate. Structurally, the plate connects sections with one another in such way that the cartridges relative to each other are located at a minimum distance, which allows to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate which help to adjust the angle of bending of holder block to the parameters of the shooter’s waist.
The top row of holes corresponds to the smallest waist «S» - up to 80 cm.
The bottom row of holes corresponds to «L» - 80 cm or more.

Holders are designed for high-speed loading of 2 or 4 cartridges 12 gauge, and produced, considering the experience and recommendations of the leading shooters-athletes of Ukraine, for sports purposes.
Due to its design, the product has the ability to work with cartridges of any length without the need for additionally adjustment of the distance between the upper and lower plates, which makes it possible due to availability of springs in the design of holders. Movable parts of holders are made of metal, static parts are made of molded plastic, which provides a long term operation of the product at high force.
The lower cups for cartridge holding are designed so that removal of cartridges can be carry out both from the upper mounts and from the lower ones.
Holders exist in versions for both left or right control arms. Holder configuration provides that the cartridges are placed in a row at an angle, so that when they are gripped, they are found in the hand at different heights relative to each other. That is, when gribbing four cartridges, the thumb is placed on cartridge below. This arrangement helps to prevent wringing of cartridges during gun loading.
1 section of holders is intended for 4 cartridges. Holders consist of blocks in which can be 7 sections (contains 28 cartridges), 4 sections (16 cartridges) and 2 sections (8 cartridges). The holder block is attached to the belt with screws. Sections in blocks are attached to each other with a help of a kydex plate. Structurally, the plate connects sections with one another in such way that the cartridges relative to each other are located at a minimum distance, which allows to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate which help to adjust the angle of bending of holder block to the parameters of the shooter’s waist.
The top row of holes corresponds to the smallest waist «S» - up to 80 cm.
The bottom row of holes corresponds to «L» - 80 cm or more.