Top

Pouches

Pouch ver.1
Pouches - Pouch ver.1 1
Pouches - Pouch ver.1 1
Pouches - Pouch ver.1 2
Pouches - Pouch ver.1 3

Pouch ver.1

39 - 45

The pouchers of the Pouch ver. 1 model, due to the absence of any straps and latches, have an additional tactical advantage in magazine retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters. The basic version of fastenings is on a pants belt 45 mm wide. Depending on the customer’s wishes, fixtures can be installed under a belt width of 35 mm, 40 mm, 45 mm and 50 mm or install special mounts on the MOLLE system. The design of the pouch provides for the adjustment of the holding power of the magazine. You can fix quick-detachable mounts and many other mounts to the various short-barreled weapon systems that currently exist.

The pouchers of the Pouch ver. 1 model, due to the absence of any straps and latches, have an additional tactical advantage in magazine retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters. The basic version of fastenings is on a pants belt 45 mm wide. Depending on the customer’s wishes, fixtures can be installed under a belt width of 35 mm, 40 mm, 45 mm and 50 mm or install special mounts on the MOLLE system. The design of the pouch provides for the adjustment of the holding power of the magazine. You can fix quick-detachable mounts and many other mounts to the various short-barreled weapon systems that currently exist.

Pouch ver.2
Pouches - Pouch ver.2 1
Pouches - Pouch ver.2 1
Pouches - Pouch ver.2 2
Pouches - Pouch ver.2 3

Pouch ver.2

37 - 43

The Pouch ver.2 model is quick-detachable and attaches to the pants belt with clips for belt width 40 mm or 45 mm. The design of the pouch provides the magazine holding force adjustment. The pouch can be placed intrernaly and externally, magazines can be installed by cartridges forward and backward. Due to the absence of any straps and clamps, pouches give an additional tactical advantage in store retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters.

The Pouch ver.2 model is quick-detachable and attaches to the pants belt with clips for belt width 40 mm or 45 mm. The design of the pouch provides the magazine holding force adjustment. The pouch can be placed intrernaly and externally, magazines can be installed by cartridges forward and backward. Due to the absence of any straps and clamps, pouches give an additional tactical advantage in store retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters.

Double Pouch ver.1
Pouches - Double Pouch ver.1 1
Pouches - Double Pouch ver.1 1
Pouches - Double Pouch ver.1 2
Pouches - Double Pouch ver.1 3

Double Pouch ver.1

62 - 68

The line of pouches Double pouch ver.1 was created based on the experience of using weapons in real conditions in order to satisfy the request for practical placement of two spare magazines with the possibility of their quickest extraction and change. The double pouch is attached to the pants belt and is more compact and comfortable than two single pauches, and the location of the magazines in Double pouch ver.1 provides easy replacement by a shorter path. Density of magazine retention in the pauch is individually adjustable. Basic version of mounts are on a pants belt 40 mm wide. Depending on the the customer’s wishes, you can install the mounts under the belt width of 35 mm, 40 mm, 45 mm and 50 mm.

The line of pouches Double pouch ver.1 was created based on the experience of using weapons in real conditions in order to satisfy the request for practical placement of two spare magazines with the possibility of their quickest extraction and change. The double pouch is attached to the pants belt and is more compact and comfortable than two single pauches, and the location of the magazines in Double pouch ver.1 provides easy replacement by a shorter path. Density of magazine retention in the pauch is individually adjustable. Basic version of mounts are on a pants belt 40 mm wide. Depending on the the customer’s wishes, you can install the mounts under the belt width of 35 mm, 40 mm, 45 mm and 50 mm.

Double Pouch ver.2
Pouches - Double Pouch ver.2 1
Pouches - Double Pouch ver.2 1
Pouches - Double Pouch ver.2 2
Pouches - Double Pouch ver.2 3

Double Pouch ver.2

72 - 78

The line of pouches of the Double pouch ver. 2 was created for military units. To ensure reliable retention, in the pouch Double pouch ver. 2 has deeper fitting of magazines. The double pouch is attached to the pants belt and is more compact and comfortable than two single pouches, while the location of the magazines in Double pouch ver. 2 provides easy replacement by a shorter path. The density retention of magazines in the pouch is individually regulated. The basic package of the pouch includes mounts on a pants belt 40 mm and 45 mm wide, as well as mounts on a molle system. Depending on the customer’s wishes, it is possible to install mounts for belt widths of 35 mm and 50 mm.

The line of pouches of the Double pouch ver. 2 was created for military units. To ensure reliable retention, in the pouch Double pouch ver. 2 has deeper fitting of magazines. The double pouch is attached to the pants belt and is more compact and comfortable than two single pouches, while the location of the magazines in Double pouch ver. 2 provides easy replacement by a shorter path. The density retention of magazines in the pouch is individually regulated. The basic package of the pouch includes mounts on a pants belt 40 mm and 45 mm wide, as well as mounts on a molle system. Depending on the customer’s wishes, it is possible to install mounts for belt widths of 35 mm and 50 mm.

Pouch Sport ver.2
Pouches - Pouch Sport ver.2 1
Pouches - Pouch Sport ver.2 1
Pouches - Pouch Sport ver.2 2
Pouches - Pouch Sport ver.2 3

Pouch Sport ver.2

43 - 66

Sport series of pouch are designed for sporting purposes or for competitions in the IPSC / IPSC. When creating them, the experience of many leading shooters and requirements of international IPSC rules were taken into account. Due to its design, the pouch has the ability to smoothly adjust the angle of the magazine in the range of 180 degrees. The design of the pouch provides for the adjustment of the holding power of the magazine. To the pants belt is fastened by a TEK-LOK accessory manufactured by Blade-Tech, USA. Also on the pouch it is possible to install a magnet to hold an additional store.

Sport series of pouch are designed for sporting purposes or for competitions in the IPSC / IPSC. When creating them, the experience of many leading shooters and requirements of international IPSC rules were taken into account. Due to its design, the pouch has the ability to smoothly adjust the angle of the magazine in the range of 180 degrees. The design of the pouch provides for the adjustment of the holding power of the magazine. To the pants belt is fastened by a TEK-LOK accessory manufactured by Blade-Tech, USA. Also on the pouch it is possible to install a magnet to hold an additional store.

Pouch Sport ver.2 (with magnet)
Pouches - Pouch Sport ver.2 (with magnet) 1
Pouches - Pouch Sport ver.2 (with magnet) 1
Pouches - Pouch Sport ver.2 (with magnet) 2
Pouches - Pouch Sport ver.2 (with magnet) 3

Pouch Sport ver.2 (with magnet)

60 - 66

Sport series pouches are designed for sporting purposes or for IPSC/IPSC competitions.
The experience of many leading IPSC shooters was taken into account when creating them. The pouchers are designed in accordance with the requirements of the international IPSC rules. Due to its design, the poucher has the ability to smoothly adjust the angle of the magazine within the range of 180 degrees. The design of the poucher provides for the adjustment of the magazine holding force. The poucher is attached to the belt using the TEK-LOK accessory manufactured by Blade-Tech, USA.

The poucher also has a magnet for holding an additional magazine.

Sport series pouches are designed for sporting purposes or for IPSC/IPSC competitions.
The experience of many leading IPSC shooters was taken into account when creating them. The pouchers are designed in accordance with the requirements of the international IPSC rules. Due to its design, the poucher has the ability to smoothly adjust the angle of the magazine within the range of 180 degrees. The design of the poucher provides for the adjustment of the magazine holding force. The poucher is attached to the belt using the TEK-LOK accessory manufactured by Blade-Tech, USA.

The poucher also has a magnet for holding an additional magazine.

Pouch Sport ver.3
Pouches - Pouch Sport ver.3 1
Pouches - Pouch Sport ver.3 1
Pouches - Pouch Sport ver.3 2
Pouches - Pouch Sport ver.3 3

Pouch Sport ver.3

64 - 70

Pouch Sport ver. 3 series are designed for sporting purposes and competitions according to IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The pouch is attached to the belt with a reliable fastener that prevents the pouch from moving during intense physical activity. Pouch Sport ver. 3 fully follows the shape of the magazine, which allows for a comfortable grip when removing the magazine. The angle of deviation of the pouch relative to the shooter's body is optimal for quick grip of the magazine, and a special recess in the side of the pouch provides the shortest path of movement when changing it. 

Pouch Sport ver. 3 series are designed for sporting purposes and competitions according to IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The pouch is attached to the belt with a reliable fastener that prevents the pouch from moving during intense physical activity. Pouch Sport ver. 3 fully follows the shape of the magazine, which allows for a comfortable grip when removing the magazine. The angle of deviation of the pouch relative to the shooter's body is optimal for quick grip of the magazine, and a special recess in the side of the pouch provides the shortest path of movement when changing it. 

Pouch Sport ver.3 with Magnet

Pouch Sport ver.3 with Magnet

85 - 91

The Sport ver. 3 Magnet series are designed for sporting purposes and competitions under IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The pouch is equipped with a special magnet for quick placement of an additional magazine on it, the strength of the magnet provides for reliable hold of the magazine during physical activity. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The poucher is attached to the belt with a secure fastener that prevents the poucher from moving during intense physical activity. The angle of deviation of the poucher relative to the shooter's body is optimal for quick magazine grip, and a special recess in the side of the poucher provides the shortest path of movement when changing it. 

The Sport ver. 3 Magnet series are designed for sporting purposes and competitions under IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The pouch is equipped with a special magnet for quick placement of an additional magazine on it, the strength of the magnet provides for reliable hold of the magazine during physical activity. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The poucher is attached to the belt with a secure fastener that prevents the poucher from moving during intense physical activity. The angle of deviation of the poucher relative to the shooter's body is optimal for quick magazine grip, and a special recess in the side of the poucher provides the shortest path of movement when changing it. 

Pouch ver.1 (for carbines)

Pouch ver.1 (for carbines)

41 - 47

This line of pouches was created based on the need to conceal an additional magazine under outerwear. Thanks to the smallest possible size of the pouch, it does not actually protrude from under clothing such as a jacket or coat. The pouch is attached to the trouser belt with 40 mm plastic fasteners. The tightness of the magazine in the pouch can be adjusted individually. Depending on the customer's preference, the pouch can be mounted for belt widths of 35 mm, 40 mm, 45 mm, and 50 mm.
Pouch Ver.1 pouches (for carbines and submachine guns), due to their minimal size, are perfect for security guards who need to conceal an additional magazine under their outerwear.

This line of pouches was created based on the need to conceal an additional magazine under outerwear. Thanks to the smallest possible size of the pouch, it does not actually protrude from under clothing such as a jacket or coat. The pouch is attached to the trouser belt with 40 mm plastic fasteners. The tightness of the magazine in the pouch can be adjusted individually. Depending on the customer's preference, the pouch can be mounted for belt widths of 35 mm, 40 mm, 45 mm, and 50 mm.
Pouch Ver.1 pouches (for carbines and submachine guns), due to their minimal size, are perfect for security guards who need to conceal an additional magazine under their outerwear.

Double Pouch ver.2 (for carabines)
Pouches - Double Pouch ver.2 (for carabines) 1
Pouches - Double Pouch ver.2 (for carabines) 1
Pouches - Double Pouch ver.2 (for carabines) 2
Pouches - Double Pouch ver.2 (for carabines) 3

Double Pouch ver.2 (for carabines)

72 - 78

The Double pouch ver. 2 (for submachine guns) was created for paramilitary units. The shape of the pouch allows you to place and fix such large magazines as magazines for HK MP5, GP STRIBOG carbine pistols and others. The double pouch is attached to a trouser belt and is more compact and comfortable than two single pouches, while the arrangement of magazines in the Double pouch ver. 2 allows for unhindered replacement of magazines in the shortest possible way. The density of the pouch is individually adjustable.
The basic version of the pouch is available for attachment to a 45 mm or 50 mm wide trouser belt and MOLLE attachment.

Depending on the customer's preference, it is possible to install a belt clip for belt widths of 35 mm, 40 mm, 45 mm and 50 mm.

The Double pouch ver. 2 (for submachine guns) was created for paramilitary units. The shape of the pouch allows you to place and fix such large magazines as magazines for HK MP5, GP STRIBOG carbine pistols and others. The double pouch is attached to a trouser belt and is more compact and comfortable than two single pouches, while the arrangement of magazines in the Double pouch ver. 2 allows for unhindered replacement of magazines in the shortest possible way. The density of the pouch is individually adjustable.
The basic version of the pouch is available for attachment to a 45 mm or 50 mm wide trouser belt and MOLLE attachment.

Depending on the customer's preference, it is possible to install a belt clip for belt widths of 35 mm, 40 mm, 45 mm and 50 mm.

Pouch ver.7 (with TEK-LOK)
Pouches - Pouch ver.7 (with TEK-LOK) 1
Pouches - Pouch ver.7 (with TEK-LOK) 1
Pouches - Pouch ver.7 (with TEK-LOK) 2
Pouches - Pouch ver.7 (with TEK-LOK) 3

Pouch ver.7 (with TEK-LOK)

47 - 54

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the possibility to quickly remove and replace them. The pouch is attached to the waistband of the pants using the Tek-Lok system. The holding force of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the possibility to quickly remove and replace them. The pouch is attached to the waistband of the pants using the Tek-Lok system. The holding force of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

Pouch ver.8 (with Molle)
Pouches - Pouch ver.8 (with Molle) 1
Pouches - Pouch ver.8 (with Molle) 1
Pouches - Pouch ver.8 (with Molle) 2
Pouches - Pouch ver.8 (with Molle) 3

Pouch ver.8 (with Molle)

54 - 60

The “POUCH ver. 8”, as well as the ”POUCH ver. 7” line was created based on the experience of using weapons in real conditions to meet the needs for practical placement of spare magazines for automatic weapons, allowing their quick removal and replacement.
The pouch is attached to the Belt Warrior belt using MOLLE Gen 3 fasteners. The holding pressure of the magazines in the pouch is individually adjustable. POUCH ver. 8” pouches are ideal for special forces.

The “POUCH ver. 8”, as well as the ”POUCH ver. 7” line was created based on the experience of using weapons in real conditions to meet the needs for practical placement of spare magazines for automatic weapons, allowing their quick removal and replacement.
The pouch is attached to the Belt Warrior belt using MOLLE Gen 3 fasteners. The holding pressure of the magazines in the pouch is individually adjustable. POUCH ver. 8” pouches are ideal for special forces.

Pouches

Pouch ver.1
Pouches - Pouch ver.1 1
Pouches - Pouch ver.1 1
Pouches - Pouch ver.1 2
Pouches - Pouch ver.1 3

Pouch ver.1

39 - 45

The pouchers of the Pouch ver. 1 model, due to the absence of any straps and latches, have an additional tactical advantage in magazine retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters. The basic version of fastenings is on a pants belt 45 mm wide. Depending on the customer’s wishes, fixtures can be installed under a belt width of 35 mm, 40 mm, 45 mm and 50 mm or install special mounts on the MOLLE system. The design of the pouch provides for the adjustment of the holding power of the magazine. You can fix quick-detachable mounts and many other mounts to the various short-barreled weapon systems that currently exist.

The pouchers of the Pouch ver. 1 model, due to the absence of any straps and latches, have an additional tactical advantage in magazine retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters. The basic version of fastenings is on a pants belt 45 mm wide. Depending on the customer’s wishes, fixtures can be installed under a belt width of 35 mm, 40 mm, 45 mm and 50 mm or install special mounts on the MOLLE system. The design of the pouch provides for the adjustment of the holding power of the magazine. You can fix quick-detachable mounts and many other mounts to the various short-barreled weapon systems that currently exist.

Pouch ver.2
Pouches - Pouch ver.2 1
Pouches - Pouch ver.2 1
Pouches - Pouch ver.2 2
Pouches - Pouch ver.2 3

Pouch ver.2

37 - 43

The Pouch ver.2 model is quick-detachable and attaches to the pants belt with clips for belt width 40 mm or 45 mm. The design of the pouch provides the magazine holding force adjustment. The pouch can be placed intrernaly and externally, magazines can be installed by cartridges forward and backward. Due to the absence of any straps and clamps, pouches give an additional tactical advantage in store retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters.

The Pouch ver.2 model is quick-detachable and attaches to the pants belt with clips for belt width 40 mm or 45 mm. The design of the pouch provides the magazine holding force adjustment. The pouch can be placed intrernaly and externally, magazines can be installed by cartridges forward and backward. Due to the absence of any straps and clamps, pouches give an additional tactical advantage in store retrieval speed. They are suitable for use by operators of military units, special police units, civilian shooters.

Double Pouch ver.1
Pouches - Double Pouch ver.1 1
Pouches - Double Pouch ver.1 1
Pouches - Double Pouch ver.1 2
Pouches - Double Pouch ver.1 3

Double Pouch ver.1

62 - 68

The line of pouches Double pouch ver.1 was created based on the experience of using weapons in real conditions in order to satisfy the request for practical placement of two spare magazines with the possibility of their quickest extraction and change. The double pouch is attached to the pants belt and is more compact and comfortable than two single pauches, and the location of the magazines in Double pouch ver.1 provides easy replacement by a shorter path. Density of magazine retention in the pauch is individually adjustable. Basic version of mounts are on a pants belt 40 mm wide. Depending on the the customer’s wishes, you can install the mounts under the belt width of 35 mm, 40 mm, 45 mm and 50 mm.

The line of pouches Double pouch ver.1 was created based on the experience of using weapons in real conditions in order to satisfy the request for practical placement of two spare magazines with the possibility of their quickest extraction and change. The double pouch is attached to the pants belt and is more compact and comfortable than two single pauches, and the location of the magazines in Double pouch ver.1 provides easy replacement by a shorter path. Density of magazine retention in the pauch is individually adjustable. Basic version of mounts are on a pants belt 40 mm wide. Depending on the the customer’s wishes, you can install the mounts under the belt width of 35 mm, 40 mm, 45 mm and 50 mm.

Double Pouch ver.2
Pouches - Double Pouch ver.2 1
Pouches - Double Pouch ver.2 1
Pouches - Double Pouch ver.2 2
Pouches - Double Pouch ver.2 3

Double Pouch ver.2

72 - 78

The line of pouches of the Double pouch ver. 2 was created for military units. To ensure reliable retention, in the pouch Double pouch ver. 2 has deeper fitting of magazines. The double pouch is attached to the pants belt and is more compact and comfortable than two single pouches, while the location of the magazines in Double pouch ver. 2 provides easy replacement by a shorter path. The density retention of magazines in the pouch is individually regulated. The basic package of the pouch includes mounts on a pants belt 40 mm and 45 mm wide, as well as mounts on a molle system. Depending on the customer’s wishes, it is possible to install mounts for belt widths of 35 mm and 50 mm.

The line of pouches of the Double pouch ver. 2 was created for military units. To ensure reliable retention, in the pouch Double pouch ver. 2 has deeper fitting of magazines. The double pouch is attached to the pants belt and is more compact and comfortable than two single pouches, while the location of the magazines in Double pouch ver. 2 provides easy replacement by a shorter path. The density retention of magazines in the pouch is individually regulated. The basic package of the pouch includes mounts on a pants belt 40 mm and 45 mm wide, as well as mounts on a molle system. Depending on the customer’s wishes, it is possible to install mounts for belt widths of 35 mm and 50 mm.

Pouch Sport ver.2
Pouches - Pouch Sport ver.2 1
Pouches - Pouch Sport ver.2 1
Pouches - Pouch Sport ver.2 2
Pouches - Pouch Sport ver.2 3

Pouch Sport ver.2

43 - 66

Sport series of pouch are designed for sporting purposes or for competitions in the IPSC / IPSC. When creating them, the experience of many leading shooters and requirements of international IPSC rules were taken into account. Due to its design, the pouch has the ability to smoothly adjust the angle of the magazine in the range of 180 degrees. The design of the pouch provides for the adjustment of the holding power of the magazine. To the pants belt is fastened by a TEK-LOK accessory manufactured by Blade-Tech, USA. Also on the pouch it is possible to install a magnet to hold an additional store.

Sport series of pouch are designed for sporting purposes or for competitions in the IPSC / IPSC. When creating them, the experience of many leading shooters and requirements of international IPSC rules were taken into account. Due to its design, the pouch has the ability to smoothly adjust the angle of the magazine in the range of 180 degrees. The design of the pouch provides for the adjustment of the holding power of the magazine. To the pants belt is fastened by a TEK-LOK accessory manufactured by Blade-Tech, USA. Also on the pouch it is possible to install a magnet to hold an additional store.

Pouch Sport ver.2 (with magnet)
Pouches - Pouch Sport ver.2 (with magnet) 1
Pouches - Pouch Sport ver.2 (with magnet) 1
Pouches - Pouch Sport ver.2 (with magnet) 2
Pouches - Pouch Sport ver.2 (with magnet) 3

Pouch Sport ver.2 (with magnet)

60 - 66

Sport series pouches are designed for sporting purposes or for IPSC/IPSC competitions.
The experience of many leading IPSC shooters was taken into account when creating them. The pouchers are designed in accordance with the requirements of the international IPSC rules. Due to its design, the poucher has the ability to smoothly adjust the angle of the magazine within the range of 180 degrees. The design of the poucher provides for the adjustment of the magazine holding force. The poucher is attached to the belt using the TEK-LOK accessory manufactured by Blade-Tech, USA.

The poucher also has a magnet for holding an additional magazine.

Sport series pouches are designed for sporting purposes or for IPSC/IPSC competitions.
The experience of many leading IPSC shooters was taken into account when creating them. The pouchers are designed in accordance with the requirements of the international IPSC rules. Due to its design, the poucher has the ability to smoothly adjust the angle of the magazine within the range of 180 degrees. The design of the poucher provides for the adjustment of the magazine holding force. The poucher is attached to the belt using the TEK-LOK accessory manufactured by Blade-Tech, USA.

The poucher also has a magnet for holding an additional magazine.

Pouch Sport ver.3
Pouches - Pouch Sport ver.3 1
Pouches - Pouch Sport ver.3 1
Pouches - Pouch Sport ver.3 2
Pouches - Pouch Sport ver.3 3

Pouch Sport ver.3

64 - 70

Pouch Sport ver. 3 series are designed for sporting purposes and competitions according to IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The pouch is attached to the belt with a reliable fastener that prevents the pouch from moving during intense physical activity. Pouch Sport ver. 3 fully follows the shape of the magazine, which allows for a comfortable grip when removing the magazine. The angle of deviation of the pouch relative to the shooter's body is optimal for quick grip of the magazine, and a special recess in the side of the pouch provides the shortest path of movement when changing it. 

Pouch Sport ver. 3 series are designed for sporting purposes and competitions according to IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The pouch is attached to the belt with a reliable fastener that prevents the pouch from moving during intense physical activity. Pouch Sport ver. 3 fully follows the shape of the magazine, which allows for a comfortable grip when removing the magazine. The angle of deviation of the pouch relative to the shooter's body is optimal for quick grip of the magazine, and a special recess in the side of the pouch provides the shortest path of movement when changing it. 

Pouch Sport ver.3 with Magnet

Pouch Sport ver.3 with Magnet

85 - 91

The Sport ver. 3 Magnet series are designed for sporting purposes and competitions under IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The pouch is equipped with a special magnet for quick placement of an additional magazine on it, the strength of the magnet provides for reliable hold of the magazine during physical activity. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The poucher is attached to the belt with a secure fastener that prevents the poucher from moving during intense physical activity. The angle of deviation of the poucher relative to the shooter's body is optimal for quick magazine grip, and a special recess in the side of the poucher provides the shortest path of movement when changing it. 

The Sport ver. 3 Magnet series are designed for sporting purposes and competitions under IPSC/IPSC rules. The experience of many leading IPSC shooters was taken into account when creating them. The pouch is equipped with a special magnet for quick placement of an additional magazine on it, the strength of the magnet provides for reliable hold of the magazine during physical activity. The design of the poucher allows you to adjust the magazine hold without using a screwdriver. The poucher is attached to the belt with a secure fastener that prevents the poucher from moving during intense physical activity. The angle of deviation of the poucher relative to the shooter's body is optimal for quick magazine grip, and a special recess in the side of the poucher provides the shortest path of movement when changing it. 

Pouch ver.1 (for carbines)

Pouch ver.1 (for carbines)

41 - 47

This line of pouches was created based on the need to conceal an additional magazine under outerwear. Thanks to the smallest possible size of the pouch, it does not actually protrude from under clothing such as a jacket or coat. The pouch is attached to the trouser belt with 40 mm plastic fasteners. The tightness of the magazine in the pouch can be adjusted individually. Depending on the customer's preference, the pouch can be mounted for belt widths of 35 mm, 40 mm, 45 mm, and 50 mm.
Pouch Ver.1 pouches (for carbines and submachine guns), due to their minimal size, are perfect for security guards who need to conceal an additional magazine under their outerwear.

This line of pouches was created based on the need to conceal an additional magazine under outerwear. Thanks to the smallest possible size of the pouch, it does not actually protrude from under clothing such as a jacket or coat. The pouch is attached to the trouser belt with 40 mm plastic fasteners. The tightness of the magazine in the pouch can be adjusted individually. Depending on the customer's preference, the pouch can be mounted for belt widths of 35 mm, 40 mm, 45 mm, and 50 mm.
Pouch Ver.1 pouches (for carbines and submachine guns), due to their minimal size, are perfect for security guards who need to conceal an additional magazine under their outerwear.

Double Pouch ver.2 (for carabines)
Pouches - Double Pouch ver.2 (for carabines) 1
Pouches - Double Pouch ver.2 (for carabines) 1
Pouches - Double Pouch ver.2 (for carabines) 2
Pouches - Double Pouch ver.2 (for carabines) 3

Double Pouch ver.2 (for carabines)

72 - 78

The Double pouch ver. 2 (for submachine guns) was created for paramilitary units. The shape of the pouch allows you to place and fix such large magazines as magazines for HK MP5, GP STRIBOG carbine pistols and others. The double pouch is attached to a trouser belt and is more compact and comfortable than two single pouches, while the arrangement of magazines in the Double pouch ver. 2 allows for unhindered replacement of magazines in the shortest possible way. The density of the pouch is individually adjustable.
The basic version of the pouch is available for attachment to a 45 mm or 50 mm wide trouser belt and MOLLE attachment.

Depending on the customer's preference, it is possible to install a belt clip for belt widths of 35 mm, 40 mm, 45 mm and 50 mm.

The Double pouch ver. 2 (for submachine guns) was created for paramilitary units. The shape of the pouch allows you to place and fix such large magazines as magazines for HK MP5, GP STRIBOG carbine pistols and others. The double pouch is attached to a trouser belt and is more compact and comfortable than two single pouches, while the arrangement of magazines in the Double pouch ver. 2 allows for unhindered replacement of magazines in the shortest possible way. The density of the pouch is individually adjustable.
The basic version of the pouch is available for attachment to a 45 mm or 50 mm wide trouser belt and MOLLE attachment.

Depending on the customer's preference, it is possible to install a belt clip for belt widths of 35 mm, 40 mm, 45 mm and 50 mm.

Pouch ver.7 (with TEK-LOK)
Pouches - Pouch ver.7 (with TEK-LOK) 1
Pouches - Pouch ver.7 (with TEK-LOK) 1
Pouches - Pouch ver.7 (with TEK-LOK) 2
Pouches - Pouch ver.7 (with TEK-LOK) 3

Pouch ver.7 (with TEK-LOK)

47 - 54

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the possibility to quickly remove and replace them. The pouch is attached to the waistband of the pants using the Tek-Lok system. The holding force of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

The POUCH ver. 7” was created based on the experience gained from using weapons in real conditions to meet the demand for practical placement of spare magazines for automatic weapons, with the possibility to quickly remove and replace them. The pouch is attached to the waistband of the pants using the Tek-Lok system. The holding force of the magazines in the pouch is individually adjustable. The “POUCH ver. 7” pouches can be comfortably worn on the waistband of trousers due to their convex shape. The “POUCH ver. 7” pouches are ideal for competitions and other sporting events.

Pouch ver.8 (with Molle)
Pouches - Pouch ver.8 (with Molle) 1
Pouches - Pouch ver.8 (with Molle) 1
Pouches - Pouch ver.8 (with Molle) 2
Pouches - Pouch ver.8 (with Molle) 3

Pouch ver.8 (with Molle)

54 - 60

The “POUCH ver. 8”, as well as the ”POUCH ver. 7” line was created based on the experience of using weapons in real conditions to meet the needs for practical placement of spare magazines for automatic weapons, allowing their quick removal and replacement.
The pouch is attached to the Belt Warrior belt using MOLLE Gen 3 fasteners. The holding pressure of the magazines in the pouch is individually adjustable. POUCH ver. 8” pouches are ideal for special forces.

The “POUCH ver. 8”, as well as the ”POUCH ver. 7” line was created based on the experience of using weapons in real conditions to meet the needs for practical placement of spare magazines for automatic weapons, allowing their quick removal and replacement.
The pouch is attached to the Belt Warrior belt using MOLLE Gen 3 fasteners. The holding pressure of the magazines in the pouch is individually adjustable. POUCH ver. 8” pouches are ideal for special forces.