The holders are designed for high-speed loading of 2 or 4 rounds of 12 gauge ammunition, based on the experience and recommendations of leading Ukrainian shooters for use in sports.

The design features of the product allow you to work with cartridges of any length without the need to additionally adjust the distance between the upper and lower plates, which is made possible by the presence of springs in the holder design. Moving parts of the holders are made of metal, static parts are made of molded plastic, which ensures a long service life of the product under high loads.

The lower ammunition holder cups are designed in such a way that ammunition can be removed from both the upper and lower holders. The holders are available in versions for both left and right handed operators. The configuration of the holders implies that the cartridges in a row are placed at an angle so that when gripped, they are at different heights relative to each other. That is, when gripping four cartridges, the thumb is placed on the cartridge below it. This arrangement helps prevent cartridges from jamming when the gun is loaded.

1 section of holders is designed for 4 cartridges. The holders consist of blocks that can have 7 sections (holds 28 rounds), 4 sections (16 rounds) and 2 sections (8 rounds). The holder block is attached to the belt with screws. The sections in the holder blocks are attached to each other by means of a kydex plate. Structurally, the plate connects the sections together in such a way that the cartridges are located at a minimum distance from each other, which allows you to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate, which allow adjusting the bending angle of the holder block to the shooter's waist.

The holders are designed for high-speed loading of 2 or 4 rounds of 12 gauge ammunition, based on the experience and recommendations of leading Ukrainian shooters for use in sports.

The design features of the product allow you to work with cartridges of any length without the need to additionally adjust the distance between the upper and lower plates, which is made possible by the presence of springs in the holder design. Moving parts of the holders are made of metal, static parts are made of molded plastic, which ensures a long service life of the product under high loads.

The lower ammunition holder cups are designed in such a way that ammunition can be removed from both the upper and lower holders. The holders are available in versions for both left and right handed operators. The configuration of the holders implies that the cartridges in a row are placed at an angle so that when gripped, they are at different heights relative to each other. That is, when gripping four cartridges, the thumb is placed on the cartridge below it. This arrangement helps prevent cartridges from jamming when the gun is loaded.

1 section of holders is designed for 4 cartridges. The holders consist of blocks that can have 7 sections (holds 28 rounds), 4 sections (16 rounds) and 2 sections (8 rounds). The holder block is attached to the belt with screws. The sections in the holder blocks are attached to each other by means of a kydex plate. Structurally, the plate connects the sections together in such a way that the cartridges are located at a minimum distance from each other, which allows you to remove 4 cartridges from two sections with one grip. There are 2 rows of holes on the kydex plate, which allow adjusting the bending angle of the holder block to the shooter's waist.